TEMPERATURE REGULATION AND CONTROL

The Smart Controller is a device for controlling ventilation and temperature in growing spaces. It automatically adjusts the ventilation according to the temperature, with a hysteresis of 3ºC, increasing the speed proportionally to temperature increases and reaching its maximum capacity if the temperature is 3ºC higher than the desired temperature. It is easy to use with just two rotary knobs, runs on a 1-phase 220/230V - 50Hz supply, and has a 5 metre long sensor.

The Temperature and Ventilation Controller is an advanced device that allows the ventilation speed to be continuously adjusted according to temperature. It offers a wide range of settings, including a hysteresis of up to 7°C, easy push-button configuration, two fan/extractor inputs, and an internal temperature sensor. This controller is ideal for managing microclimates in environments such as greenhouses or grow rooms.

The Twin Controller is a fan controller for temperature regulation, with independent settings for minimum air inlet and outlet speed and negative pressure. It includes a temperature sensor and features:

Inlet and outlet air control with independent settings.
Fully adjustable automatic temperature control.
Easy push button calibration.
Incorporates a rear mounting plate and temperature sensor.
Temperature range from 5 to 55°C with 1°C differential.
IP44 type protection.
Compact dimensions: 140x220x110mm.

The Multi Controller is a device that functions as two climate controllers in one, with independent hysteresis. It offers three main functionalities: separate control of the inlet and outlet airflow in one space, simultaneous control of two spaces with different configurations and a resistance capacity of up to 32 AMP. It comes with a rear mounting and cooling plate, two external temperature sensors and four fan/exhaust sockets in two groups with independent controls. Specifications include a temperature range of 5 to 55°C, with a differential of 1°C per step and dimensions of 150 x 230 x 85 mm.

The speed regulator with 2 A fuse is designed to control the speed of fans and extractors up to 300 W. It is ideal for adjusting the motor speed of centrifugal fans and other types of fans. It is crucial not to decrease the ventilation below 50% to avoid permanent damage to the motor. If less ventilation is required, it is better to purchase another fan rather than reduce the power of the existing fan further, as lowering it below 50% can irreversibly damage the motor. This regulator ensures safe and efficient use of ventilation systems.

Tempcon is a plug-in unit designed to control heating and cooling systems. It activates the electrical current depending on the temperature: for heating when the temperature falls below the set point and for cooling when the temperature exceeds the set point. Specifications include a maximum load of 16 A - 3680 W for resistive loads and 2 A - 460 W for inductive loads, with a temperature operating range of 0 to 40 °C and an accuracy of ± 1%. Tempcon is ideal for maintaining an accurate and controlled ambient temperature.